Products (1580)

Flip Remote Key 433MHz 4D60 80BIT Chip 3 Button for Hyundai Fob  Placement for Part Numbers: PN:  95430-1S011 / 95430-1S001, FCCID: OKA-866T                                                Work for Hyundai : for Hyundai HB20   Programming:   You need to have this key blade cut and programmed by a local locksmith. DO NOT go to the DEALER they will charge you for ONE HOUR of labor and they tend to want to sell you one of their remotes and often will not program the remote for you or they may charge you and then claim i does not work. A locksmith is fast and inexpensive compared to a dealer.

Smart Remote Key 3 Button 434MHz for Hyundai FobPlacement for Part Numbers : PN: 95440-S0000                                                 Work for Hyundai : Hyundai I30 N 2018+   Programming:   You need to have this key blade cut and programming by a local locksmith. DO NOT go to the DEALER they will charge you for ONE HOUR of labor and they tend to want to sell you one of their remotes and often will not program the remote for you or they may charge you and then claim i does not work. A locksmith is fast and inexpensive compared to a dealer.

Original Remote Control Car Key - 2 Buttons & 312MHz - FOB for Honda STEPWGN MPV

OEM Remote Key 3 Button  FSK 434MHz PCF7961M / HITAG AES / 4A Chip for Renault   Placement for Part Numbers:  FCC ID: CWTWB1G767, IC: 17880-FWB1G767 Work for Renault : 2013-2017 For Renault Captur2013-2017 For Renault Symbol2013-2017 For Renault Megane 32013-2017 For Renault Kadjar2016- For Renault Kaptur (Russia)   Programming:   You need to have this key blade cut and programmed by a local locksmith. DO NOT go to the DEALER they will charge you for ONE HOUR of labor and they tend to want to sell you one of their remotes and often will not program the remote for you or they may charge you and then claim i does not work. A locksmith is fast and inexpensive compared to a dealer.

  OEM Smart Remote Key 5 Button 433MHz 4A for Fob InfinitiPlacement for Part Numbers :  S180144707 , 285E3-5NY7A Work for Infiniti : for QX50 2020   Programming:   You need to have this key blade cut and programming by a local locksmith. DO NOT go to the DEALER they will charge you for ONE HOUR of labor and they tend to want to sell you one of their remotes and often will not program the remote for you or they may charge you and then claim i does not work. A locksmith is fast and inexpensive compared to a dealer.  

Description Reviews Remote Key Shell 2 Button for Honda Motorcycle Placement for Part Numbers: 2 Button Work for Honda :for Honda MotorcycleProgramming: You need to have this key blade cut by a local locksmith. DO NOT go to the DEALER they will charge you for ONE HOUR of labor and they tend to want to sell you one of their remotes and often will not program the remote for you or they may charge you and then claim i does not work. A locksmith is fast and inexpensive compared to a dealer. Original Shell Remote Key Shell 2 Button for Honda Motorcycle key CaseOriginal Shell Remote Key Shell 2 Button for Honda Motorcycle key Case

Description Reviews Smart Remote Key 4 Button 315MHzfor Cadillac Escalade Fob Placement for Part Numbers: FCCID:OUC6000066 Work for Cadillac:for Escalade 2007-2014Programming: You need to have this key blade cut and Programming by a local locksmith. DO NOT go to the DEALER they will charge you for ONE HOUR of labor and they tend to want to sell you one of their remotes and often will not program the remote for you or they may charge you and then claim i does not work. A locksmith is fast and inexpensive compared to a dealer. OUC6000066 315MHz Smart Remote Key Fob 4 Button for Cadillac Escalade 2007 2008 2009 2010 2011 2012 2013 2014 (No Key Blade)OUC6000066 315MHz Smart Remote Key Fob 4 Button for Cadillac Escalade 2007 2008 2009 2010 2011 2012 2013 2014 (No Key Blade)

Description Reviews Smart Remote Key 4Button 315MHz forCadillacPlacement for Part Numbers : FCCID: OUC6000066 ,PN: 22889449, 20864934, 20998256, 20866682, 20814372, 25840557, 5923877, IC:850K-6000066 Work for Cadillac : Cadillac CTS2008-2013 Programming: There are 2 different procedures for 2008-2010 Cadillac CTS and DTS. 2011 and newer vehicles must be programmed by a professional automotive locksmith or dealership.PROCEDURE #1 This procedure is for vehicles with the driver information center. It will be a button to the right of the steering wheel, with a vehicle icon and the letter i. 1.Insert key and switch the ignition ON (just shy of starting vehicle without cranking engine)2. Press vehicle information button until PRESS TO RELEARN REMOTE KEY is displayed.3. Press the set/reset button (button will have a checkmark) until REMOTE KEY LEARNING ACTIVE is displayed. Vehicle is now in programming mode.4. Press and hold LOCK and UNLOCK buttons at the same time on first remote for approximately 15 seconds. An acoustic signal will be heard indicating successful programming.5. Repeat step 4. to program additional remotes. You can have up to 8 programmed remotes for this vehicle. You must program ALL remotes including existing remotes.6. To exit programming mode turn ignition OFF, remove key and test all remotes. PROCEDURE #2This procedure is for vehicles without the drivers information center. 1. Insert key into the ignition and turn to ON (Just shy of starting vehicle without cranking engine).2. Press the trip odometer reset button until RELEARN REMOTE KEY is displayed.3. Press and hold the trip odometer reset button for approximately 3 seconds until REMOTE KEY LEARNING ACTIVE displays.4. Press and hold LOCK and UNLOCK buttons at the same time on first remote for approximately 15 seconds. An acoustic signal will be heard indicating successful programming.5. Repeat step 4. to program additional remotes. You can have up to 8 programmed remotes for this vehicle. You must program ALL remotes including existing remotes.6. To exit programming mode turn ignition OFF, remove key and test all remotes.Procedure for 08-10 Cadillac STS. 2011 and newer vehicles must be programmed by a professional automotive locksmith or dealership.Obtain all remote transmitters for this vehicle. 1. Start with vehicle off and key out of ignition.2. Place a currently functioning remote as well as the new remote inside the cabin of the vehicle.3. Insert key into driver's door lock cylinder and cycle the lock cylinder to UNLOCK 5 times in 5 seconds. READY FOR FOB #X (X will be remote 2, 3, or 4) will be displayed on the DIC (Driver Information Center).4. Locate the remote pocket in the center console between the driver and passenger seats. Place the new, unprogrammed remote in the pocket in the center console with the buttons facing forward.5. When the programming is complete you will hear an audible tone. READY FOR FOB #X or MAX # FOBS LEARNED will now be displayed on the DIC.6. Remove first remote that was programmed and place next remote to be programmed in the remote pocket.7. Once all remotes have been programmed in the pocket you can exit program mode and test all remotes for proper programming.NOTE: When programming remotes with a remote start function, you must idle the vehicle for 20 to 30 minutes and leave the remotes in programming pocket. OUC6000066 Replacement Remote Control Key Fob 4 Button 315MHz for Cadillac CTS 2008-2013OUC6000066 Replacement Remote Control Key Fob 4 Button 315MHz for Cadillac CTS 2008-2013

Remote Key 2+1 Button 315MHz ID46 Chip for fit Mitsubishi MIT3    Placement for Part Numbers:  FCC ID: OUCG8D-625M-A, IC: 850G-G8D625MA, PN: 6370A148     Work for fit Mitsubishi : for fit Mitsubishi I-MeiV 2011 - 2014  for fit Mitsubishi Outlander 2007-2016for fit Mitsubishi Outlander Sport  2014-2016    Programming:   You need to have this key blade cut and programmed by a local locksmith. DO NOT go to the DEALER they will charge you for ONE HOUR of labor and they tend to want to sell you one of their remotes and often will not program the remote for you or they may charge you and then claim i does not work. A locksmith is fast and inexpensive compared to a dealer.

Description Reviews Remote Key 2/3 Button313.8MHz/315MHz/433MHzforMitsubishi Placement for Part Numbers: FCC ID: OUCG8D-525M-A (OUCG8D525MA) Part #: G8D-525M-A (G8D525MA) OMRONG8D-525M-A6 (G8D525MA6) 90LP0075G8D-525M-A9 (G8D525MA9) 90LP0078DEALER PART# MR587983 Canada/Mexico Part #: 850104241A - 313.8MHZ FCCID: HYQ12ABA , MITSU01 ONE-SHOT- 315MHz FCCID: OUCG8D522MA, P/N:G8D-522M-A Work for Mitsubishi :2000-2005 Mitsubishi Eclipse2002-2007 Mitsubishi Lancer1997-2004 Mitsubishi Montero Sport2003-2006 Mitsubishi Outlander Programming: You need to have this key blade cutby a local locksmith. DO NOT go to the DEALER they will charge you for ONE HOUR of labor and they tend to want to sell you one of their remotes and often will not program the remote for you or they may charge you and then claim i does not work. A locksmith is fast and inexpensive compared to a dealer. OUCG8D525MA , OUCG8D522MA, HYQ12ABA Remote Key 2/3 Button Fob 315MHz/313.8MHz/433MHz for Mitsubishi Eclipse Lancer Montero Sport OutlanderOUCG8D525MA , OUCG8D522MA, HYQ12ABA Remote Key 2/3 Button Fob 315MHz/313.8MHz/433MHz for Mitsubishi Eclipse Lancer Montero Sport Outlander

Flip Remote Key 2 Button 433MHz  NCF2951ETT HITAG 2 46 Chip for Fob OpelPlacement for Part Numbers :  P/N: 13588683   Work for Opel : Opel Vauxhall Astra K   2015-2019   Programming:   You need to have this key blade cut and programming by a local locksmith. DO NOT go to the DEALER they will charge you for ONE HOUR of labor and they tend to want to sell you one of their remotes and often will not program the remote for you or they may charge you and then claim i does not work. A locksmith is fast and inexpensive compared to a dealer.

Smart Remote Key FSK 433.92MHz PCF7952A HITAG 2 ID46 Chip 4 Button for Renault   Placement for Part Numbers: P/N: 285975779R   Work for Renault : Laguna III   2008-2012ZOE            2009-2017Fluence       2009-2016Megane III  ,Scenic, Grand Scenic  2009-2015     Programming:   You need to have this key blade cut and programming by a local locksmith. DO NOT go to the DEALER they will charge you for ONE HOUR of labor and they tend to want to sell you one of their remotes and often will not program the remote for you or they may charge you and then claim i does not work. A locksmith is fast and inexpensive compared to a dealer.