For Toyota RAV4 Corolla Yaris P.N: 60081 2 Button 433MHz 4C Car Key Fob

£25.99

For Toyota RAV4 Corolla Yaris P.N: 60081 2 Button 433MHz 4C Car Key Fob

£25.99
0 watching this item.

Delivery between 1 and 5.

Product description
For Toyota RAV4 Corolla Yaris P.N 60081 2 Button 433MHz 4C Car Key Fob

Brand: Aftermarket
Frequency: 433MHz
Part Number: 60081
CMII ID: 2005DJ1379
Model: 12BBY-08
Chip: 4C
Part Number: 60081
Buttons: 2
Battery: N/A


Remote part programming:

STEP1. Open Driver side door.

STEP 2. Put the Original key in and out of ignition for 2 times.

STEP 3. Close and open driver door for 2 time.

STEP 4. Original Key in and out for once.

STEP 5. Shut and open door for twice.

STEP 6. Close door.

STEP 7. Put Original Key in the ignition and Turn ignition on.

STEP 8. Turn ignition off and remove key.

STEP 9. Door locks will cycle.

STEP 10. Do the following for all remotes:

Press lock and unlock together for 1s, then press the lock button.

STEP 11. Locks will cycle put key in ignition turn to on then off.

STEP 12. Remove key from ignition, close door and test remote.

To Delete All Remotes from the Vehicle.

At Step 7, turn the key on and off for 5 times then remove key, door locks will cycle for 5 times. Turn the key on then off. Open shut door. All remotes that were coded into the car, have now been removed.

2 Key part transponder chip programming manual:

STEP 1. Put Original master key in and out of ignition for 5 times. Finish with key in ignition (in, out, in, out, in, out, in, out, in).

STEP 2. Open and shut door for 6 times.

STEP 3. Remove original key and insert the new key (Do not turn the key, just insert it into the ignition.

STEP 4. Leave for 60s (or till light goes out).

STEP 5. After 60s security light stops flashing then you can start car.

STEP 6. Take key out.

STEP 7. Open and shut door.


Compatibility:

Toyota RAV4
Toyota Corolla
Toyota Yaris


Disclaimer:

The frequency of 433MHz is commonly used in Britain and Europe. If unsure please consult your Auto Locksmith or dealer first.

All keys must be cut and programmed by a qualified auto locksmith.

Please check your existing key, the button configuration, the key blade and the internal structure against the images in this listing to make sure they are the same. Please also make sure that you know the remote frequency that you require.

Please note any keys that are cut or programmed are non refundable.


Trademarks:

All trademarks, logos and brand names are the property of their respective owners. All company, product and service names used in this website are for identification purposes only. Use of these names, trademarks and brands does not imply endorsement.